What are the key points to pay attention to when choosing stainless steel quick joints?

1, fluid type, temperature (please select suitable fluid type, temperature body material and sealing material quick joint) according to the fluid, suitable body material, sealing material is different. For example, the quick connector is air. Steel is recommended, or brass or stainless steel for water.

2, the pressure of the liquid (please select the quick joint suitable for the pressure performance of the fluid pressure) the pressure of the fluid is also the key to select the quick joint. The quick joint used for oil pressure is 5.0Mpa(51kgf/cm²)-68.6Mpa(700kgf/cm²) between the formation of a series, corresponding to the pressure characteristics, the quick joint structure is also different.

3, automatic switch valve structure (please select the valve structure suitable for piping purposes of the quick joint) for the structure of the valve, there are two switch type, one-way switch type and two open. Due to the separation in addition to the two switch type, there is fluid flow from the pipe. So pay attention.

4. The use environment of the quick joint (please select the structure and material of the quick joint suitable for the use of the environment) combined with the humidity conditions, dust condition, and easy corrosion and other use environment, to consider the type, body material and sealing material of the quick joint selected.

5, the shape and size of installation (please order the product after confirming the final shape and size) please determine the type and material of the quick joint, and specify the assembly shape and size corresponding to the piping characteristics. Note that size is related to flow rate.

Previous:Common types and selection principles of hydraulic tubing

Next:none